RunInRed 16,404 Posted September 10, 2015 Share Posted September 10, 2015 Auburn Equipment Manager develops revolutionary shoulder pad system to keep players coolPublished: 09/09/2015 By: Sarah Phillips Combating the heat in Alabama isn't an easy task, but Auburn University's football team has a new way to stay cool during practice and game days. Equipment Manager for Auburn Athletics Dana Marquez recently developed a lightweight shoulder pad system that doesn't retain moisture and deflects energy to reduce impact. "Shoulder pads haven't changed in about ten years," Marquez said. "Everybody's concentrating solely on helmets, and the reality is there are more body injuries in football than there are helmet injuries." Years ago, Marquez was approached by equestrian coach Greg Williams to create a padding that could be used under an injured horse's saddle. Through research and collaborations with the faculty in the School of Kinesiology, he discovered the shape of the padding was a key element to decrease impact and shifted his focus to shoulder pads. "I started looking around on the Internet and YouTube, and actually looked at a video of a padding system that was testing itself against M&Ms, and I realized it wasn't the foam—it was the M&M that was doing all the work," Marquez recalled. "Just the sphere shape itself means there's no way to get a direct hit on it, so there's no way to go down. It always deflects left to right, side to side, and that's where the technology came about." After understanding how a sphere shape effectively deflects, Marquez also added a hole to the middle of the spheres to allow greater impact on the material and to allow energy to escape. Each impact creates energy, or heat, which needs to be ventilated away from the body for an athlete to stay cool. Once the initial design concept was created, Marquez partnered with Russell Athletics to manufacture the shoulder pad system known as CarbonTek. This system combines an OS Technology foam compression vest and a carbon fiber exoskeleton to provide revolutionary lightweight protection for athletes. "Being in the South, we're always trying to look at moisture management," Marquez said. "The average shoulder pad will weigh anywhere from eight to 15 pounds when it gets wet, so we were really trying to reduce that weight issue." Weighing 3.8 pounds while dry, the OS Technology foam is a material that can absorb water without gaining weight. The compression vest only gains approximately a tenth of a pound when completely submerged in water or sweat, which is important during summer practices with temperatures reaching 100 degrees. The carbon fiber shell in the CarbonTek shoulder pad system maintains its shape throughout tough hits. This exoskeleton is molded to specifically fit each athlete's body and features a military grade buckle system for easier usability. Combined with the compression vest, a custom fit is achieved for maximum comfort and protection. "Football is a big time collision sport," Marquez said. "The average impact right now in college football is 55 miles per hour; this two piece system can disperse that energy." After testing the pad system for four years, the product is now in its second generation. Marquez continues to streamline the product with new body lengths and flexibility features by listening to player feedback. "The biggest thing for us from an improvement stand point of equipment is talking to our athlete and having an open communication with them," Marquez said. "The other thing is having a great communication line with our sports medicine department. They're the ones treating the injury and can let us know what we are trying to protect." The CarbonTek shoulder pad system is currently worn by Auburn football players, high school football teams and many former Auburn athletes now playing in the NFL. In fact, every NFL team has at least one player who wears CarbonTek, with its popularity only rising with the positive response Marquez receives. Marquez said he plans to continue working to protect Auburn athletes with the best equipment possible while he continues to dream up new ideas. "We're going to continue to push the envelope on technology and new developments," Marquez said. "We're doing everything that we can for our Auburn athletes to make sure that they are staying safe." http://ocm.auburn.ed...layers-cool.htm Link to comment Share on other sites More sharing options...
WarTim 3,456 Posted September 10, 2015 Share Posted September 10, 2015 Auburn ingenuity!!! Link to comment Share on other sites More sharing options...
wareagle13 88 Posted September 10, 2015 Share Posted September 10, 2015 Weighing 3.8 pounds while dry, the OS Technology foam is a material that can absorb water without gaining weight. This doesn't compute with me, now if it's extracting the water/sweat and then immediately evaporating it into the air that's one thing. But this just sounds like a poorly worded explanation of what the technology is actually doing. Link to comment Share on other sites More sharing options...
McLoofus 35,182 Posted September 10, 2015 Share Posted September 10, 2015 Very cool. I guess an equipment manager does more than laundry these days Interesting that they're partnering with Russell. Link to comment Share on other sites More sharing options...
McLoofus 35,182 Posted September 10, 2015 Share Posted September 10, 2015 Weighing 3.8 pounds while dry, the OS Technology foam is a material that can absorb water without gaining weight. This doesn't compute with me, now if it's extracting the water/sweat and then immediately evaporating it into the air that's one thing. But this just sounds like a poorly worded explanation of what the technology is actually doing. I wondered same. But I'm no scientist. Or journalist. Link to comment Share on other sites More sharing options...
CleCoTiger 1,957 Posted September 10, 2015 Share Posted September 10, 2015 Weighing 3.8 pounds while dry, the OS Technology foam is a material that can absorb water without gaining weight. This doesn't compute with me, now if it's extracting the water/sweat and then immediately evaporating it into the air that's one thing. But this just sounds like a poorly worded explanation of what the technology is actually doing. Poor wording. Watch the video and the explanation is a little better but has no detail. Basically, they seem to be saying that this thing is designed to quickly wick away water and moisture and not hold onto it. Sounds like the material choices were non-hygroscopic so the pads basically don't hold water and moisture like some materials in wide use perhaps do. Regardless, nice reduction in weight and retained heat. Wonder what these things cost? Link to comment Share on other sites More sharing options...
alexava 6,973 Posted September 10, 2015 Share Posted September 10, 2015 Weighing 3.8 pounds while dry, the OS Technology foam is a material that can absorb water without gaining weight. This doesn't compute with me, now if it's extracting the water/sweat and then immediately evaporating it into the air that's one thing. But this just sounds like a poorly worded explanation of what the technology is actually doing. Poor wording. Watch the video and the explanation is a little better but has no detail. Basically, they seem to be saying that this thing is designed to quickly wick away water and moisture and not hold onto it. Sounds like the material choices were non-hygroscopic so the pads basically don't hold water and moisture like some materials in wide use perhaps do. Regardless, nice reduction in weight and retained heat. Wonder what these things cost? or who holds the patent? Link to comment Share on other sites More sharing options...
jared52 4,354 Posted September 10, 2015 Share Posted September 10, 2015 Not just good with a sewing machine. Link to comment Share on other sites More sharing options...
AUloggerhead 2,229 Posted September 10, 2015 Share Posted September 10, 2015 Not just good with a sewing machine. Lol. I was half expecting them to break out the sewing machine on the sideline in Atlanta after Barber developed a hole in his pants. Link to comment Share on other sites More sharing options...
AURocketman 73 Posted September 10, 2015 Share Posted September 10, 2015 Weighing 3.8 pounds while dry, the OS Technology foam is a material that can absorb water without gaining weight. This doesn't compute with me, now if it's extracting the water/sweat and then immediately evaporating it into the air that's one thing. But this just sounds like a poorly worded explanation of what the technology is actually doing. I wondered same. But I'm no scientist. Or journalist. Remember college engineering example problems. Massless, frictionless, etc. Evaporative cooling. Mass is conserved. It "ain't" Rocket Science. Rocket Engineering! Link to comment Share on other sites More sharing options...
WarNole 141 Posted September 10, 2015 Share Posted September 10, 2015 Innovative for sure. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.